CMD+E | Share to Default Destination Share the selected project or clip using the default destination |
A | Select (Arrow) Tool Make the Select tool active |
B | Blade Tool Make the Blade tool active |
SHIFT+C | Crop Tool Make the Crop tool active and display onscreen controls for the selected clip or the topmost clip under the playhead |
ALT+D | Distort Tool Make the Distort tool active and display onscreen controls for the selected clip or the topmost clip under the playhead |
H | Hand Tool Make the Hand tool active |
P | Position Tool Make the Position tool active |
SHIFT+T | Transform Tool Make the Transform tool active and display onscreen controls for the selected clip or the topmost clip under the playhead |
T | Trim Tool Make the Trim tool active |
Z | Zoom Tool Make the Zoom tool active |
Tag: Final Cut Pro Cheat Sheet
Below is the Final Cut Pro Cheat Sheet. This is a series of non-linear video editing software programs first developed by Macromedia Inc. and later Apple Inc. Speed up your editing workflow with Final Cut Pro keyboard shortcuts
SHIFT+S | Audio Skimming Turn audio skimming on or off |
CMD+CTRL+Y | Audition: Preview Play the pick in a context in the timeline |
CMD+ALT+S | Clip Skimming Turn clip skimming on or off |
ALT+SHIFT+3 | Cut/Switch Multicam Audio Only Turn on audio-only mode for multicam cutting and switching |
ALT+SHIFT+1 | Cut/Switch Multicam Audio and Video Turn on audio/video mode for multicam cutting and switching |
ALT+SHIFT+2 | Cut/Switch Multicam Video Only Turn on video-only mode for multicam cutting and switching |
Down Arrow | Down Go to the next item (in the browser) or the next edit point (in the timeline) |
CTRL+Down Arrow | Down While editing a text field, go to the next item (in the browser) or the next edit point (in the timeline) |
SHIFT+Left Arrow | Go Back 10 Frames Move the playhead back 10 frames |
SHIFT+Right Arrow | Go Forward 10 Frames Move the playhead forward 10 frames |
Home key | Go to Beginning Move the playhead to the beginning of the timeline or the first clip in the browser |
End key | Go to End Move the playhead to the end of the timeline or to the last clip in the browser |
ALT+SHIFT+’ | Go to Next Bank Display the next bank of angles in the current multicam clip |
’ | Go to Next Edit Move the playhead to the next edit point in the timeline |
ALT+Right Arrow | Go to Next Field Move the playhead to the next field in an interlaced clip |
Right Arrow | Go to Next Frame Move the playhead to the next frame |
ALT+Right Arrow | Go to Next Subframe Move the playhead to the next audio subframe |
ALT+SHIFT+; | Go to Previous Bank Display the previous bank of angles in the current multicam clip |
; | Go to Previous Edit Move the playhead to the previous edit point in the timeline |
ALT+Left Arrow | Go to Previous Field Move the playhead to the previous field in an interlaced clip |
Left Arrow | Go to Previous Frame Move the playhead to the previous frame |
ALT+Left Arrow | Go to Previous Subframe Move the playhead to the previous audio subframe |
SHIFT+O | Go to Range End Move the playhead to the end of the range selection |
SHIFT+I | Go to Range Start Move the playhead to the beginning of the range selection |
CMD+CTRL+ALT+Right Bracket | Look Clockwise Roll the 360° viewer clockwise |
CMD+CTRL+ALT+Left Bracket | Look Counterclockwise Roll the 360° viewer counterclockwise |
CMD+CTRL+ALT+Down Arrow | Look Down Tilt the 360° viewer down |
CMD+CTRL+ALT+Left Arrow | Look Left Pan the 360° viewer to the left |
CMD+CTRL+ALT+Right Arrow | Look Right Pan the 360° viewer to the right |
CMD+CTRL+ALT+Up Arrow | Look Up Pan the 360° viewer up |
CMD+L | Loop Playback Turn looped playback on or off |
CMD+CTRL+ALT+9 | Mirror VR Headset Mirror the display of the connected VR headset in the 360° viewer |
SHIFT+A | Monitor Audio Turn on or turn off audio monitoring for the angle being skimmed |
- | Negative Timecode Entry Enter a negative timecode value to move the playhead back, move a clip earlier, or trim a range or clip, depending on your selection |
CMD+CTRL+Right Arrow | Next Clip Go to the next item (in the browser) or the next edit point (in the timeline) |
CTRL+’ | Next Marker Move the playhead to the next marker |
CMD+CTRL+ALT+7 | Output to VR Headset Send 360° video to the connected VR headset |
SHIFT+Question Mark (?) | Play Around Play around the playhead position |
L | Play Forward Play forward (press L multiple times to increase the playback speed) |
ALT+Space bar | Play from Playhead Play from the playhead position |
CMD+SHIFT+F | Play Full Screen Play full screen from the skimmer or playhead position |
J | Play Reverse Play in reverse (press J multiple times to increase the reverse playback speed) |
CTRL+J | Play Reverse Play in reverse while editing a text field (press J multiple times to increase the reverse playback speed) |
SHIFT+Space bar | Play Reverse Play in reverse |
/ | Play Selection Play the selection |
CTRL+SHIFT+O | Play to End Play from the playhead to the end of the selection |
Space bar | Play/Pause Start or pause playback |
CTRL+Space bar | Play/Pause Start or pause playback while editing a text field |
= | Positive Time code EntryEnter a positive timecode value to move the playhead forward, move a clip later, or trim a range or clip, depending on your selection |
CMD+CTRL+Left Arrow | Previous Clip Go to the previous item (in the browser) or the previous edit point (in the timeline) |
CTRL+; | Previous Marker Move the playhead to the previous marker |
SHIFT+V | Set Monitoring Angle Set the angle being skimmed as the monitoring angle |
S | Skimming Turn skimming on or off |
ALT+SHIFT+A | Start/Stop Voiceover Recording Start or stop recording audio from the Record Voiceover window |
K | Stop Stop playback |
CTRL+K | Stop Stop playback while editing a text field |
CMD+[ | Timeline History Back Go back one level in the timeline history |
CMD+] | Timeline History Forward Go forward one level in the timeline history |
Up Arrow | Up Go to the previous item (in the browser) or the previous edit point (in the timeline) |
CTRL+Up Arrow | Up While editing a text field, go to the previous item (in the browser) or the previous edit point (in the timeline) |
CTRL+ALT+6 | Clip Appearance: Clip Labels Only Depending on the clip name setting, display timeline clips with clip names, role names, or active angle names only |
CTRL+ALT+Down Arrow | Clip Appearance: Decrease Waveform Size Decrease the size of audio waveforms for timeline clips |
CTRL+ALT+5 | Clip Appearance: Filmstrips Only Display timeline clips with large filmstrips only |
CTRL+ALT+Up Arrow | Clip Appearance: Increase Waveform Size Increase the size of audio waveforms for timeline clips |
CTRL+ALT+4 | Clip Appearance: Large Filmstrips Display timeline clips with small audio waveforms and large filmstrips |
CTRL+ALT+2 | Clip Appearance: Large Waveforms Display timeline clips with large audio waveforms and small filmstrips |
CTRL+ALT+3 | Clip Appearance: Waveforms and Filmstrips Display timeline clips with audio waveforms and video filmstrips of equal size |
CTRL+ALT+1 | Clip Appearance: Waveforms Only Display timeline clips with large audio waveforms only |
CMD+SHIFT+- | Decrease Clip Height Decrease the browser clip height |
CMD+SHIFT+= | Increase Clip Height Increase the browser clip height |
CMD+SHIFT+, | Show Fewer Filmstrip Frames Show fewer filmstrip frames in browser clips |
CTRL+A | Show/Hide Audio Animation Show or hide the Audio Animation editor for the selected clips or components |
CTRL+Y | Show/Hide Skimmer Info Show or hide clip information when skimming in the browser |
CTRL+V | Show/Hide Video Animation Show or hide the Video Animation editor for the selected timeline clips |
CMD+SHIFT+. | Show More Filmstrip Frames Show more filmstrip frames in browser clips |
CMD+ALT+SHIFT+, | Show One Frame per Filmstrip Show one frame per filmstrip |
CMD+ALT+2 | Toggle Filmstrip/List View Switch the browser between filmstrip view and list view |
ALT+SHIFT+N | View Clip Names Show or hide clip names in the browser |
CMD+Plus Sign (+) | Zoom In Zoom in to the browser, viewer, or timeline |
CMD+Minus Sign (–) | Zoom Out Zoom out of the browser, viewer, or timeline |
SHIFT+Z | Zoom to Fit Zoom the contents to fit the size of the browser, viewer, or timeline |
CTRL+Z | Zoom to Samples Turn zooming into audio samples on or off |
CMD+9 | Background Tasks Show or hide the Background Tasks window |
CMD+8 | Go to Audio Enhancements Make the Audio Enhancements inspector active |
CMD+6 | Go to Color Board Make the Color Board active |
CMD+1 | Go to Browser Make the browser active |
CMD+ALT+4 | Go to Inspector Make the current inspector active |
CMD+2 | Go to Timeline Make the timeline active |
CMD+3 | Go to Viewer Make the viewer active |
CTRL+Tab | Next Tab Go to the next pane in the inspector or the Color Board |
CTRL+SHIFT+Tab | Previous Tab Go to the previous pane in the inspector or the Color Board |
CMD+ALT+8 | Record Voiceover Show or hide the Record Voiceover window |
CMD+CTRL+H | Show Histogram Show the histogram in the viewer |
CMD+CTRL+V | Show Vectorscope Show the vectorscope in the viewer |
CMD+CTRL+W | Show Video Waveform Show the waveform monitor in the viewer |
CMD+SHIFT+7 | Show/Hide Angles Show or hide the angle viewer |
CMD+SHIFT+8 | Show/Hide Audio Meters Show or hide the audio meters |
CMD+CTRL+1 | Show/Hide Browser Show or hide the browser |
CMD+CTRL+6 | Show/Hide Comparison Viewer Show or hide the comparison viewer |
CMD+5 | Show/Hide Effects Browser Show or hide the Effects browser |
CMD+CTRL+5 | Show/Hide Transitions Browser Show or hide the Transitions browser |
CMD+CTRL+3 | Show/Hide Event Viewer Show or hide the event viewer |
CMD+4 | Show/Hide Inspector Show or hide the inspector |
CMD+K | Show/Hide Keyword Editor Show or hide the keyword editor |
CMD+1 | Show/Hide Libraries Sidebar Show or hide the Libraries sidebar |
CMD+SHIFT+1 | Show/Hide Photos and Audio Sidebar Show or hide the Photos and Audio sidebar |
CMD+` | Show/Hide Sidebar Show or hide the sidebar |
CMD+ALT+7 | Show/Hide 360° Viewer Show or hide the 360° viewer |
CMD+CTRL+2 | Show/Hide Timeline Show or hide the timeline |
CMD+SHIFT+2 | Show/Hide Timeline Index Show or hide the timeline index for the open project |
CMD+ALT+1 | Show/Hide Titles and Generators Sidebar Show or hide the Titles and Generators sidebar |
CMD+7 | Show/Hide Video Scopes Show or hide the video scopes in the viewer |
CMD+CTRL+4 | Toggle Inspector Height Switch between the half-height view and full-height view in the inspector |
CMD+H | Hide Final Cut Pro |
CMD+ALT+H | Hide all applications except Final Cut Pro |
CMD+ALT+K | Open the Command Editor |
CMD+M | Minimize Final Cut Pro |
CMD+O | Open an existing library or a new library |
CMD+, | Open the Final Cut Pro Preferences window |
CMD+Q | Quit Final Cut Pro |
CMD+SHIFT+Z | Redo the last command |
CMD+Z | Undo the last command |
CTRL+ALT+L | Adjust the audio volume across all selected clips to a specific dB value |
CTRL+L | Adjust the audio volume across all selected clips by the same dB value |
E | Add the selection to the end of the storyline |
CTRL+SHIFT+Y | Audition: Add the selected clip to the audition |
ALT+Y | Audition: Duplicate as Audition– Create an audition with a timeline clip and a duplicate version of the clip, including applied effects |
CMD+SHIFT+Y | Audition: Duplicate from Original– Duplicate the selected audition clip without applied effects |
SHIFT+Y | Audition: Replace and Add to Audition – Create an audition and replace the timeline clip with the current selection |
CMD+B | Blade Cut the primary storyline clip (or the selection) at the skimmer or playhead location |
CMD+SHIFT+B | Blade All Cut all clips at the skimmer or playhead location |
CMD+SHIFT+G | Break the selected item into its component parts |
CTRL+D | Change the duration of the selection |
CTRL+SHIFT+T | Connect Default Lower Third Connect the default lower third to the primary storyline |
CTRL+T | Connect Default Title Connect the default title to the primary storyline |
Q | Connect to Primary Storyline Connect the selection to the primary storyline |
SHIFT+Q | Connect to Primary Storyline – Backtimed Connect the selection to the primary storyline, aligning the selection’s endpoint with the skimmer or playhead |
CMD+Y | Create an audition from the selection |
CMD+G | Create a storyline from a selection of connected clips |
1 | Cut and Switch to Viewer Angle 1 Cut and switch the multicam clip to angle 1 of the current bank |
2 | Cut and Switch to Viewer Angle 2 Cut and switch the multicam clip to angle 2 of the current bank |
3 | Cut and Switch to Viewer Angle 3 Cut and switch the multicam clip to angle 3 of the current bank |
4 | Cut and Switch to Viewer Angle 4 Cut and switch the multicam clip to angle 4 of the current bank |
5 | Cut and Switch to Viewer Angle 5 Cut and switch the multicam clip to angle 5 of the current bank |
6 | Cut and Switch to Viewer Angle 6 Cut and switch the multicam clip to angle 6 of the current bank |
7 | Cut and Switch to Viewer Angle 7 Cut and switch the multicam clip to angle 7 of the current bank |
8 | Cut and Switch to Viewer Angle 8 Cut and switch the multicam clip to angle 8 of the current bank |
9 | Cut and Switch to Viewer Angle 9 Cut and switch the multicam clip to angle 9 of the current bank |
Delete | Delete the timeline selection, reject the browser selection, or remove a through edit |
CMD+ALT+Delete | Delete Selection Only Delete the selection and attach the connected clip or clips to the resulting gap clip |
CMD+SHIFT+A | Deselect All Deselect all selected items |
CMD+D | Duplicate the browser selection |
V | Enable or disable playback for the selection |
CTRL+S | View audio and video separately for selected clips |
CTRL+ALT+S | Expand or collapse audio components for the selection in the timeline |
SHIFT+X | Extend the selected edit point to the skimmer or playhead position |
SHIFT+Down Arrow | Extend Selection Down In the browser list view, add the next item to the selection |
CMD+CTRL+Right-Arrow | Extend Selection to Next Clip In the timeline, add the next item to the selection |
SHIFT+Up Arrow | Extend Selection Up In the browser list view, add the previous item to the selection |
ALT+SHIFT+Y | Dissolve the audition and replace it with the audition pick |
W | Insert the selection at the skimmer or playhead position |
ALT+F | Insert a freeze frame at the playhead or skimmer location in the timeline, or connect a freeze frame from the skimmer or playhead location in the event to the playhead location in the timeline |
ALT+W | Insert a gap clip at the skimmer or playhead position |
CMD+ALT+W | Insert the default generator at the skimmer or playhead position |
CMD+ALT+Up Arrow | Lift the selection from the storyline and connect it to the resulting gap clips |
CTRL+- | Lower the audio volume by 1 dB |
CTRL+P | Move the playhead by entering a timecode value |
ALT+G | Create a new compound clip (if there’s no selection, create an empty compound clip) |
ALT+, | Nudge Audio Subframe Left Nudge the selected audio edit point left by one subframe, creating a split edit |
ALT+SHIFT+, | Nudge Audio Subframe Left Many Nudge the selected audio edit point left by 10 subframes, creating a split edit |
ALT+. | Nudge Audio Subframe Right Nudge the selected audio edit point right by one subframe, creating a split edit |
ALT+SHIFT+. | Nudge Audio Subframe Right Many Nudge the selected audio edit point right by 10 subframes, creating a split edit |
ALT+Down Arrow | Nudge Down Nudge down the value of the selected keyframe in the animation editor |
, | Nudge Left Nudge the selection one unit to the left |
SHIFT+, | Nudge Left Many Nudge the selection 10 units to the left |
. | Nudge Right Nudge the selection one unit to the right |
SHIFT+. | Nudge Right Many Nudge the selection 10 units to the right |
ALT+Up Arrow | Nudge Up Nudge up the value of the selected keyframe in the animation editor |
Y | Open the selected audition |
` | Temporarily override clip connections for the selection |
D | Overwrite Overwrite at the skimmer or playhead position |
SHIFT+D | Overwrite – Backtimed Overwrite from the skimmer or playhead position back |
CMD+ALT+Down Arrow | Overwrite to Primary Storyline Overwrite at the skimmer or playhead position in the primary storyline |
ALT+V | Paste the selection and connect it to the primary storyline |
CMD+V | Insert the Clipboard contents at the skimmer or playhead position |
CTRL+SHIFT+Left Arrow | Previous Angle Switch to the previous angle in the multicam clip |
ALT+SHIFT+Left Arrow | Previous Audio Angle Switch to the previous audio angle in the multicam clip |
CTRL+Left Arrow | Previous Pick Select the previous clip in the Audition window, making it the audition pick |
CMD+SHIFT+Left Arrow | Previous Video Angle Switch to the previous video angle in the multicam clip |
CTRL+= | Raise the audio volume by 1 dB |
SHIFT+R | Replace Replace the selected clip in the timeline with the browser selection |
ALT+R | Replace from Start Replace the selected clip in the timeline with the browser selection, starting from its start point |
SHIFT+Delete | Replace with Gap Replace the selected timeline clip with a gap clip |
CMD+A | Select all clips |
C | Select the clip under the pointer in the timeline |
CMD+Up Arrow | Select Clip Above Select the clip above the current timeline selection at the skimmer or playhead location |
CMD+Down Arrow | Select Clip Below Select the clip below the current timeline selection at the skimmer or playhead location |
SHIFT+[ | Select Left Audio Edge For audio/video clips in expanded view, select the left edge of the audio edit point |
[ | Select Left Edge Select the left edge of the edit point |
SHIFT+\ | Select Left and Right Audio Edit Edges For audio/video clips in expanded view, select the left and right edges of the audio edit point |
\ | Select Left and Right Edit Edges Select the left and right edges of the edit point |
CTRL+\ | Select Left and Right Video Edit Edges For audio/video clips in expanded view, select the left and right edges of the video edit point |
CTRL+[ | Select Left Video Edge For audio/video clips in expanded view, select the left edge of the video edit point |
CTRL+SHIFT+Right Arrow | Select Next Angle Switch to the next angle in the multicam clip |
ALT+SHIFT+Right Arrow | Select Next Audio Angle Switch to the next audio angle in the multicam clip |
CMD+Right Arrow | Select Next Clip Move the playhead and the selection to the next topmost timeline clip in the same role |
CTRL+Right Arrow | Select Next Pick Select the next clip in the Audition window, making it the audition pick |
CMD+SHIFT+Right Arrow | Select Next Video Angle Switch to the next video angle in the multicam clip |
CMD+Left Arrow | Select Previous Clip Move the playhead and the selection to the previous topmost timeline clip in the same role |
SHIFT+] | Select Right Audio Edge For audio/video clips in expanded view, select the right edge of the audio edit point |
] | Select Right Edge Select the right edge of the edit point |
CTRL+] | Select Right Video Edge For audio/video clips in expanded view, select the right edge of the video edit point |
CMD+SHIFT+O | Set Additional Selection End Set an additional range selection endpoint at the playhead or skimmer location |
CMD+SHIFT+I | Set Additional Selection Start Set an additional range selection start point at the playhead or skimmer location |
CTRL+E | Show/Hide Precision Editor When an edit point is selected, show or hide the precision editor |
N | Turn snapping on or off |
ALT+S | Solo the selected items in the timeline |
SHIFT+1 | Source Media: Audio & VideoTurn on audio/video mode to add the video and audio portion of your selection to the timeline |
SHIFT+3 | Source Media: Audio OnlyTurn on audio-only mode to add the audio portion of your selection to the timeline |
SHIFT+2 | Source Media: Video OnlyTurn on video-only mode to add the video portion of your selection to the timeline |
CMD+CTRL+ALT+C | Replace the selected captions with abutting single-line captions, one for each line of text in the original captions. |
ALT+1 | Switch to Viewer Angle 1 Switch the multicam clip to angle 1 of the current bank |
ALT+2 | Switch to Viewer Angle 2 Switch the multicam clip to angle 2 of the current bank |
ALT+3 | Switch to Viewer Angle 3 Switch the multicam clip to angle 3 of the current bank |
ALT+4 | Switch to Viewer Angle 4 Switch the multicam clip to angle 4 of the current bank |
ALT+5 | Switch to Viewer Angle 5 Switch the multicam clip to angle 5 of the current bank |
ALT+6 | Switch to Viewer Angle 6 Switch the multicam clip to angle 6 of the current bank |
ALT+7 | Switch to Viewer Angle 7 Switch the multicam clip to angle 7 of the current bank |
ALT+8 | Switch to Viewer Angle 8 Switch the multicam clip to angle 8 of the current bank |
ALT+9 | Switch to Viewer Angle 9 Switch the multicam clip to angle 9 of the current bank |
G | Turn on or turn off the ability to build storylines when dragging clips in the timeline |
ALT+] | Trim End Trim the end of the selected or topmost clip to the skimmer or playhead position |
ALT+[ | Trim Start Trim the clip start point to the skimmer or playhead position |
ALT+\ | Trim to Selection Trim clip start and end points to the range selection |
CTRL+SHIFT+T | Add Basic Lower Third Connect a basic lower-third title to the primary storyline |
CTRL+T | Add Basic Title Connect a basic title to the primary storyline |
CMD+ALT+E | Add Default Audio Effect Add the default audio effect to the selection |
CMD+T | Add Default Transition Add the default transition to the selection |
ALT+E | Add Default Video Effect Add the default video effect to the selection |
ALT+Delete | Color Board: Reset Current Board Controls Reset the controls in the current Color Board pane |
CMD+CTRL+C | Color Board: Switch to the Color Pane Switch to the Color pane in the Color Board |
CMD+CTRL+E | Color Board: Switch to the Exposure Pane Switch to the Exposure pane in the Color Board |
CMD+CTRL+S | Color Board: Switch to the Saturation Pane Switch to the Saturation pane in the Color Board |
CMD+ALT+C | Copy Effects Copy the selected effects and their settings |
ALT+SHIFT+C | Copy Keyframes Copy the selected keyframes and their settings |
ALT+SHIFT+X | Cut Keyframes Cut the selected keyframes and their settings |
CMD+ALT+B | Enable/Disable Balance Color Turn Balance Color corrections on or off |
CMD+SHIFT+M | Match Audio Match the sound between clips |
CMD+ALT+M | Match Color Match color between clips |
ALT+Tab | Next Text Navigate to the next text item |
CMD+SHIFT+V | Paste Attributes Paste selected attributes and their settings to the selection |
CMD+ALT+V | Paste Effects Paste effects and their settings to the selection |
ALT+SHIFT+V | Paste Keyframes Paste keyframes and their settings to the selection |
ALT+SHIFT+Tab | Previous Text Navigate to the previous text item |
CMD+SHIFT+X | Remove Attributes Remove selected attributes from the selection |
CMD+ALT+X | Remove Effects Remove all effects from the selection |
CMD+R | Retime Editor Show or hide the retime editor |
SHIFT+N | Retime: Create Normal Speed Segment Set the selection to play at normal (100 percent) speed |
SHIFT+H | Retime: Hold Create a 2-second hold segment |
CMD+ALT+R | Retime: Reset Reset the selection to play forward at normal (100 percent) speed |
CTRL+SHIFT+V | Solo Animation Show one effect at a time in the Video Animation editor |
Delete | Delete Delete the timeline selection, reject the browser selection, or remove a through the edit |
CMD+F | Find Show or hide the Filter window (in the browser) or the timeline index (in the timeline) |
CMD+ALT+3 | Go to Event Viewer Make the event viewer active |
CMD+I | Import Media Import media from a device, a camera, or an archive |
CMD+CTRL+J | Library Properties Open the Library Properties inspector for the current library |
CMD+Delete | Move to Trash Move the selection to the Finder Trash |
CMD+N | New Project Create a new project |
CMD+J | Project Properties Open the Properties inspector for the current project |
CTRL+SHIFT+R | Render All Start all rendering tasks for the current project |
CTRL+R | Render Selection Start rendering tasks for the selection |
CMD+SHIFT+R | Reveal in Finder Reveal the selected event clip’s source media file in the Finder |
ALT+C | Add Caption Add a caption to the active language subrole at the playhead location |
M | Add Marker Add a marker at the location of the skimmer or playhead |
CTRL+C | All Clips Change the browser filter settings to show all clips |
ALT+M | Add Marker and Modify Add a marker and edit the marker’s text |
CTRL+1 | Apply Keyword Tag 1 Apply keyword 1 to the selection |
CTRL+2 | Apply Keyword Tag 2 Apply keyword 2 to the selection |
CTRL+3 | Apply Keyword Tag 3 Apply keyword 3 to the selection |
CTRL+4 | Apply Keyword Tag 4 Apply keyword 4 to the selection |
CTRL+5 | Apply Keyword Tag 5 Apply keyword 5 to the selection |
CTRL+6 | Apply Keyword Tag 6 Apply keyword 6 to the selection |
CTRL+7 | Apply Keyword Tag 7 Apply keyword 7 to the selection |
CTRL+8 | Apply Keyword Tag 8 Apply keyword 8 to the selection |
CTRL+9 | Apply Keyword Tag 9 Apply keyword 9 to the selection |
ALT+X | Clear Selected Ranges Clear the range selection |
ALT+O | Clear Range End Clear the range’s endpoint |
ALT+I | Clear Range Start Clear the range’s start point |
CTRL+M | Delete Marker Delete the selected marker |
CTRL+SHIFT+M | Delete Markers in Selection Delete all of the markers in the selection |
CMD+SHIFT+A | Deselect All Deselect all selected items |
CTRL+SHIFT+C | Edit Caption Open the selected caption in the caption editor |
F | Favorite Rate the browser selection as favorite |
CTRL+F | Favorites Change the browser filter settings to show favorites |
CTRL+H | Hide Rejected Change the browser filter settings to hide rejected clips |
CMD+SHIFT+K | New Keyword Collection Create a new Keyword Collection |
CMD+ALT+N | New Smart Collection Create a new Smart Collection |
R | Range Selection Tool Make the Range Selection tool active |
Delete | Reject Mark the current selection in the browser as rejectedNote: The Delete key removes selected items if the timeline is active instead of the browser. |
CTRL+Delete | Rejected Change the browser filter settings to show rejected clips |
CTRL+0 | Remove All Keywords From Selection Remove all keywords from the browser selection |
CTRL+ALT+D | Roles: Apply for Dialogue Role Apply Dialogue subroles to the selected clip’s components |
CTRL+ALT+E | Roles: Apply for Effects Role Apply Effects subroles to the selected clip’s components |
CTRL+ALT+M | Roles: Apply for Music Role Apply Music subroles to the selected clip’s components |
CTRL+ALT+T | Roles: Apply for Titles Role Apply the Titles role to the selected clip |
CTRL+ALT+V | Roles: Apply for Video Role Apply the Video role to the selected clip |
CMD+A | Select All Select all clips |
X | Select Clip Range Set the range selection to match the boundaries of the clip below the skimmer or playhead |
CMD+SHIFT+O | Set Additional Range End Set an additional range selection endpoint at the playhead or skimmer location |
CMD+SHIFT+I | Set Additional Range Start Set an additional range selection start point at the playhead or skimmer location |
O | Set Range End Set the endpoint for the range |
CTRL+O | Set Range End Set the endpoint for the range while editing a text field |
I | Set Range Start Set the start point for the range |
CTRL+I | Set Range Start Set the start point for the range while editing a text field |
U | Unrate Remove ratings from the selection |
ALT+N | New Event Create a new event |
CMD+SHIFT+N | New Folder Create a new folder |
SHIFT+F | Reveal in Browser Reveal the selected clip in the browser |
CMD+ALT+SHIFT+F | Reveal Project in Browser Reveal the open project in the browser |
CMD+ALT+G | Synchronize Clips Sync the selected event clips |